logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1209B)

    

  1. # alcor_dactyl
  3. ![alcor_dactyl](https://i.imgur.com/F0E1JCQh.jpg)
  5. This is a handwired dactyl manufor utalising an RP2040-zero
  7. * Keyboard Maintainer: [Ethan](https://github.com/rocketstrong)
  8. * Hardware Supported: Waveshare RP2040-Zero
  9. * Hardware Availability: https://www.waveshare.com/wiki/RP2040-Zero
  10. * 3D Print File Source: https://dactyl.mbugert.de/manuform
  12. Make example for this keyboard (after setting up your build environment):
  14.     make handwired/alcor_dactyl:default
  16. Flashing example for this keyboard:
  18.     make handwired/alcor_dactyl:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  27. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available