logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1327B)

    

  1. # handwired/3dp660_oled
  3. ![handwired/3dp660_oled](https://i.imgur.com/AQ6VQfgh.jpg)
  5. *A handwired FC660 layout with OLED display support.*
  7. * Keyboard Maintainer: [xia0](https://github.com/xia0)
  8. * Hardware Supported: ATmega32U4 e.g. Arduino Pro Micro or Teensy 2.0
  9.   * Note: If using a Pro Micro, pins B0 and D5 are required. [Click for details](https://golem.hu/guide/pro-micro-upgrade/).
  10. * Hardware Availability: [Printables](https://www.printables.com/model/464322-3dp-fc660-v3-oled-hand-wired-mechanical-keyboard)
  12. Make example for this keyboard (after setting up your build environment):
  14.     make handwired/3dp660_oled:default
  16. Flashing example for this keyboard:
  18.     make handwired/3dp660_oled:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  27. * **Physical reset button**: Briefly press the button on the MCU or short RST to GND.
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available