logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1079B)

    

  1. # GreatPad
  3. 20 Keys Custom Macro Pad, 2 Encoders, OLED 128x64, with USB Type-C, RGB underglow, RGB Per Key Lighting. 
  5. * Keyboard Maintainer: [gkeyboard](https://github.com/gkeyboard)
  6. * Hardware Supported: GreatPad PCB
  7. * Hardware Availability: http://www.mltelectronic.com
  9. Make example for this keyboard (after setting up your build environment):
  11.     make gkeyboard/greatpad:default
  13. Flashing example for this keyboard:
  15.     make gkeyboard/greatpad:default:flash
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  19. ## Bootloader
  21. Enter the bootloader in 3 ways:
  23. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  24. * **Physical boot button**: Hold down the boot button on RP2040 and plug in the keyboard
  25. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available