logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1144B)

    

  1. # GPAD8-2R
  3. ![GPAD8-2R](https://i.imgur.com/jAaO7gYh.png)
  5. 8 Keys Custom Macro Pad, 2 Encoders, with USB Type-C, RGB underglow, RGB Per Key Lighting. 
  7. * Keyboard Maintainer: [gkeyboard](https://github.com/gkeyboard)
  8. * Hardware Supported: GPAD8-2R PCB
  9. * Hardware Availability: http://www.mltelectronic.com
  11. Make example for this keyboard (after setting up your build environment):
  13.     make gkeyboard/gpad8_2r:default
  15. Flashing example for this keyboard:
  17.     make gkeyboard/gpad8_2r:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available