logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

rules.mk (1156B)

    

  1. #----------------------------------------------------------------------------
  2. # make gergo:germ:dfu
  3. # Make sure you have dfu-programmer installed!
  4. #----------------------------------------------------------------------------
  5. # Firmware options
  6. BALLER = no 			# Enable to ball out
  7. BALLSTEP = 20  			# Multiple in px to move, multiplied by layer number
  8. SCROLLSTEP = 1 			# Lines to scroll with ball
  9. MOUSEKEY_ENABLE = yes  		# Mouse keys, needed for baller
  11. #Debug options
  12. VERBOSE 		 = yes
  13. DEBUG_MATRIX_SCAN_RATE   = no
  14. DEBUG_BALLER 		 = no
  15. DEBUG_MATRIX		 = yes
  17. # A bunch of stuff that you shouldn't touch unless you
  18. # know what you're doing.
  19. #
  20. # No touchy, capiche?
  21. SRC += matrix.c
  22. I2C_DRIVER_REQUIRED = yes
  23. ifneq ($(strip $(BALLSTEP)),)
  24.     OPT_DEFS += -DTRKSTEP=$(strip $(BALLSTEP))
  25. endif
  26. ifneq ($(strip $(SCROLLSTEP)),)
  27.     OPT_DEFS += -DSCROLLSTEP=$(strip $(SCROLLSTEP))
  28. endif
  29. ifeq ($(strip $(BALLER)), yes)
  30. 	POINTING_DEVICE_ENABLE	= yes
  31.     POINTING_DEVICE_DRIVER = custom
  32.     OPT_DEFS += -DBALLER
  33. endif
  34. ifeq ($(strip $(DEBUG_BALLER)), yes)
  35.     OPT_DEFS += -DDEBUG_BALLER
  36. endif
  37. ifeq ($(strip $(DEBUG_MATRIX)), yes)
  38.     OPT_DEFS += -DDEBUG_MATRIX
  39. endif