logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1933B)

    

  1. # Fruitbar
  3. ![Fruitbar](https://i.imgur.com/MlJudRrh.jpeg)
  5. A budget-oriented 40% with base kit compatibility. Perfect for those who have always wanted to try a 40% but worried about the lack of punctuation and arrow keys.
  7. * Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
  8. * Hardware Supported:
  9.   * Fruitbar PCB R1 (atmega32u4)
  10.     * If the keyboard was built with an Elite-C, use the `fruitykeeb/fruitbar/r1/elite_c` firmware for RGB and encoder support.
  11.   * Fruitbar PCB R2 (RP2040, rp2040)
  12. * Hardware Availability:
  13.   * R1 Group Buy took place between 2021-10-01 and 2021-10-24 on [FruityKeeb](https://fruitykeeb.xyz/).
  14.   * R2 Group Buy took place between 2023-02-01 1400 UTC and 2023-03-04 0359 UTC on [P3DStore](https://p3dstore.com)(US), [42keebs.eu](https://42keebs.eu)(EU), [CustomKBD](https://customkbd.com)(AU).
  16. Make example for this keyboard (after setting up your build environment):
  18.     make fruitykeeb/fruitbar/r1:default
  19.     make fruitykeeb/fruitbar/r2:default
  21. Flashing example for this keyboard:
  23.     make fruitykeeb/fruitbar/r1:default:flash
  24.     make fruitykeeb/fruitbar/r2:default:flash
  26. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  28. ## Bootloader
  30. Enter the bootloader in 3 ways:
  32. * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear EEPROM/emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
  33. * **Physical reset**:
  34.   - R1: Short the RST and GND pins on the Pro Micro.
  35.   - R2: While holding down the `Boot` button, press the `Reset` button.
  36. * **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the default keymap it is on the second layer, replacing the Left Control key in the bottom left.