logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1229B)

    

  1. # frobiac/redtilt
  3. ![frobiac/redtilt](https://i.imgur.com/stMcpmSh.jpeg)
  5. Custom 3D-printed and handwired 46-key split-keyboard with trackpoint developed in 2013.
  7. * Keyboard Maintainer: [frobiac](https://github.com/frobiac)
  8. * Hardware Supported: Teensy-2.0, IBM Trackpoint
  9. * Development History: [deskthority.net](https://deskthority.net/viewtopic.php?p=116641#p116641)
  10. * Layout [Full KLE](http://www.keyboard-layout-editor.com/#/gists/8f30f08f84f61749c0e549f7eca97262)
  11. * [Original Firmware](https://github.com/frobiac/adnw)
  13. Make example for this keyboard (after setting up your build environment):
  15.     make frobiac/redtilt
  17. Flashing example for this keyboard:
  19.     make frobiac/redtilt:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 2 ways:
  27. * **Physical reset button**: Briefly press the button on the Teensy by inserting a small pin in the small hole in the switch plate
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available