logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (873B)

    

  1. # Friedrich
  3. ![friedrich](https://i.imgur.com/LH15u37l.jpg)
  5. A small printer friendly 3D printed 50% keyboard.
  7. * Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
  8. * Hardware Supported: Friedrich PCB by kb-elmo
  9. * Hardware Availability: [Open source project](https://github.com/MarvFPV/Friedrich)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make friedrich:default
  15. Flashing example for this keyboard:
  17.     make friedrich:default:flash
  19. **Bootloader:** Press the physical reset button on the top side of the PCB or hold down ESC while plugging in the board.
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).