logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1009B)

    

  1. # Avalon PCB by FJLaboratories
  3. The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.
  5. * Keyboard Maintainer: [mrnoisytiger (FJLaboratories)](https://github.com/mrnoisytiger)
  6. * Hardware Supported: Avalon
  8. Make example for this keyboard (after setting up your build environment):
  10.     make fjlabs/avalon:default
  12. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  14. ## Bootloader
  16. Enter the bootloader in 3 ways:
  18. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  19. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  20. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available