logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (907B)

    

  1. # SPRH
  3. ![SPRH](https://i.imgur.com/fkI5ryph.jpg)
  5. SPRH (Square Peg-Round Hole) is a 65% ortholinear board compatibile with standard keycap sets.
  7. * Keyboard Maintainer: [Eye Oh Designs](https://github.com/joedinkle)
  8. * Hardware Supported: SPRH ver 1.00
  9. * Hardware Availability: Groupbuy ran in April 2021
  11. Make example for this keyboard (after setting up your build environment):
  13.     make eyeohdesigns/sprh:default
  15. Flashing example for this keyboard:
  17.     make eyeohdesigns/sprh:default:flash
  19. To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer.
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).