logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1253B)

    

  1. # eternal_keypad
  3. ![eternal_keypad](https://i.imgur.com/BAzc343.png)
  5. A 36 key gaming keypad that can be assembled and configured for both left and right handed mouse users.
  7. * Keyboard Maintainer: [duckyb](https://github.com/duckyb)
  8. * Hardware Supported: ETERNAL Keypad
  9. * Hardware Availability: Open Source, files available on [gitHub](https://github.com/duckyb/eternal-keypad)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make eternal_keypad:default
  15. Flashing example for this keyboard:
  17.     make eternal_keypad:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard
  26. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (activated by holding the lower right key and tapping the lower left key)
  27. * **Physical reset button**: Briefly sort the pads labeled "RST" and "GND" on the micro-controller