logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1225B)

    

  1. # ergoslab
  3. ![ergoslab](https://raw.githubusercontent.com/tomsaleeba/ergoslab/master/ergoslab.jpg)
  6. A split ergo 5x6 keyboard with hotswap sockets and a heap of thumb keys designed
  7. by Tom Saleeba. [More info on the GitHub
  8. Repo](https://github.com/tomsaleeba/ergoslab).
  10. **Status** The ergoslab is currently being beta-tested.
  12. * Keyboard Maintainer: [Tom Saleeba](https://github.com/tomsaleeba)
  13. * Hardware Supported: Pro Micro (ATmega32U4)
  14. * Hardware Availability: gerbers are available from the [releases page on the
  15. GitHub repo](https://github.com/tomsaleeba/ergoslab/releases). Get them
  16. manufactured at your favourite PCB house. I used JLCPCB.
  19. Make example for this keyboard (after setting up your build environment):
  21.     make ergoslab:default
  23. Example of flashing this keyboard:
  25.     make ergoslab:default:flash
  27. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
  28. and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
  29. for more information. Brand new to QMK? Start with our
  30. [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  32. A build guide for this keyboard can be found here: [Build
  33. Guide](https://github.com/tomsaleeba/ergoslab/blob/master/build-guide.md)