logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1812B)


  1. # EnvKB DELIRIUM
  2. ![Image of EnvKB TKL PCB](https://i.imgur.com/a7UaS4mh.png)
  3. A low cost standard TKL design which takes inspiration from the CFTKB Mysterium. All versions are designed for reference Pi Picos.
  4. * Keyboard Maintainer: [Envious-Data](https://github.com/envious-data)
  5. * Hardware Supported:
  6. * Delirium Prototype (`tkl/rev0`)
  7. * Delirium (`tkl/rev1`)
  8. * Delirium RGB (`tkl/rgb`)
  9. * Hardware Availability: [Mechboards](https://mechboards.co.uk/products/envkb-delirium-tkl-kit), [GitHub](https://github.com/Envious-Data/Env-KB)
  10. Make example for this keyboard (after setting up your build environment):
  11. make enviousdesign/tkl/rgb:default
  12. Flashing example for this keyboard:
  13. make enviousdesign/tkl/rgb:default:flash
  14. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  15. ## Bootloader
  16. Enter the bootloader in 3 ways:
  17. * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
  18. * **Physical reset**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button.
  19. * **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, replacing the Esc key.
  20. After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.