logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1349B)

    

  1. # dumbpad
  3. ![dumbpad](https://i.imgur.com/1T7ciLZl.jpg)
  5. dumbpad is a num/macro pad available in two major form factors - single- and dual-rotary encoder.
  7. * Single-encoder PCBs are reversible - components can be soldered to either side to allow
  8. the encoder to be on either the left or right side.
  9. * Dual-encoder PCBs come in two versions - one with the encoders in the bottom corners, the otherin the top corners
  11. Support for dumbpad all PCB revisions can be found in this directory.
  13. * Maintainer: [imchipwood](https://github.com/imchipwood)
  14. * PCB repository: [dumbpad on github](https://github.com/imchipwood/dumbpad)
  15.   * PCB revisions:
  16.     * v0.x - these revisions have two LEDs for layer indication
  17.       * ['v0x'](v0x/): Default setup for single rotary encoder v0.x PCBs
  18.       * ['v0x_right'](v0x_right/): Same as v0x but with rotary encoder on right side (components on bottom of PCB)
  19.       * ['v0x_dualencoder'](v0x_dualencoder/): Dual-encoder PCBs
  20.     * v1.x - these revisions have three LEDs - two for layer indication, one for numlock indication
  21.       * ['v1x'](v1x/): Default setup for v1.x PCBs with a single rotary encoder on the left side
  22.       * ['v1x_right'](v1x_right/): Same as v1x but with rotary encoder on right side (components on bottom of PCB)
  23.       * ['v1x_dualencoder'](v1x_dualencoder/): v1x PCB with two rotary encoders