logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1355B)

    

  1. # DP3000
  3. ![dp3000 macropad](https://i.imgur.com/uBHS8EYh.jpg)
  5. dp3000 is a simple yet elegant macropad, 2x4 (8 keys), dual encoder, embedded with an Atmel 32u4 chip, powered by QMK.
  6. * Rev. 1 Support RGB matrix
  7. * Rev. 2 Support RGB light (underglow)
  8. * Keyboard Maintainer: [Deddia Permana](https://github.com/depermana12)
  9. * Hardware Supported: DP3000 PCB rev1 and rev2, ATmega32u4
  10. * Hardware Availability: [tokopedia.com/gundamtricks](https://www.tokopedia.com/gundamtricks)
  12. Make example for this keyboard (after setting up your build environment):
  14.     make dp3000/rev1:default
  15.     make dp3000/rev2:default
  17. Flashing example for this keyboard:
  19.     make dp3000/rev1:default:flash
  20.     make dp3000/rev2:default:flash
  22. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  24. ## Bootloader
  26. Enter the bootloader in 3 ways:
  28. * Bootmagic reset: Hold down the key at (0,0) in the matrix (left rotary encoder push switch) and plug in the keyboard
  29. * Physical reset button: Briefly press reset button twice, located in front of the first rotary encoder (left rotary encoder)
  30. * Keycode in layout: Press the key mapped to QK_BOOT if it is available