logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1103B)

    

  1. # SBL
  3. ![SBL](https://i.imgur.com/HqRfr4bh.jpg)
  5. An O ring mount 60%, akin to the otd 356mini
  7. * Keyboard Maintainer: [Zeix](https://github.com/itsme-zeix)
  8. * Hardware Supported: SBL Solder PCB rev1
  9. * Hardware Availability: https://dnworks.co/products/sbl
  11. Make example for this keyboard (after setting up your build environment):
  13.     make dnworks/sbl:default
  15. Flashing example for this keyboard:
  17.     make dnworks/sbl:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Short the 'USB_BOOT' button and plug in keyboard or briefly short the `RESET` and `GND` pads on the SWD header twice
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available