logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1276B)

    

  1. # Gondolindrim X Dark Magnum Ergo 1 PCB QMK firmware
  3. The Magnum Ergo 1 is an Alice-layout ergonomic keyboard designed by Dark, with a PCB designer by Gondolindrim.
  5. * Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
  6. * Hardware Supported: proprietary PCB using STM32F4x1C microcontroller;
  7. * Availability: as of november 2022 both keyboard and PCB were sold in a private Group Buy; therefore availability is limited.
  9. ## How to flash
  11. ### Enter bootloader
  13. The DFU state in the bootloader can be accessed in 3 ways:
  15. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, grave accent in the default keymap) and plug in the keyboard;
  16. * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds;
  17. * **Keycode in layout**: Press the key mapped to `QK_BOOT`; in the default layout, that is top left key ('grave') in layer 1.
  19. ### How to compile and flash
  21. You can compile the Iron 165R2 default keymap by using the following:
  23.     make magnum_ergo_1:default
  25. And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
  27.     make magnum_ergo_1:default:flash