logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1133B)

    

  1. # cxt_studio/12e3
  3. ![cxt_studio/12e3](https://i.postimg.cc/NFK8rY8N/M5rtTSP.png)
  5. 3x4 ortho layout, with 3 encoders.
  7. * Keyboard Maintainer: [muge](https://github.com/muge)
  8. * Hardware Supported: CXT Studio 12E3
  9. * Hardware Availability: AliExpress, Taobao
  11. Make example for this keyboard (after setting up your build environment):
  13.     make cxt_studio/12e3:default
  15. Flashing example for this keyboard:
  17.     make cxt_studio/12e3:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Briefly press the button on the back of the PCB, located under the large encoder, on the right side
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. It is included in the default layout