logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1042B)

    

  1. # Bachoo Crin
  3. Crin is an F-rowless 65%.
  5. * Keyboard Maintainer: [KnoblesseOblige](https://github.com/KnoblesseOblige)
  6. * Hardware Supported: STM32F303CBT
  7. * Hardware Availability: TBD
  9. Make example for this keyboard (after setting up your build environment):
  11.     make crin:default
  13. Flashing example for this keyboard:
  15.     make crin:default:flash
  17. To reset the board into bootloader mode, do one of the following:
  19. * Hold Esc while plugging the PCB in, if Bootmagic Lite is enabled (also erases persistent settings).
  20. * Press the `QK_BOOT` keycode, if programmed on the keymap (Fn+R by default).
  21. * Slide the switch just below the reset button to the left and press the reset button.
  22.   * Please note that you must slide it back to the right for the PCB to boot QMK again.
  24. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).