logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1417B)

    

  1. # converter/xmk
  3. `converter/xmk` is the QMK keyboard definition for [𝑥MK](https://github.com/manna-harbour/xmk).
  5. * Keyboard Maintainer: [Manna Harbour](https://github.com/manna-harbour)
  6. * Hardware Supported: Any QMK-compatible MCU board
  7. * Hardware Availability: No additional hardware required
  9. Make example for this keyboard (after setting up your build environment):
  11.     make converter/xmk:default
  13. Flashing example for this keyboard:
  15.     make converter/xmk:default:flash
  17. To flash pre-compiled firmware to a pro-micro on Linux without using the `qmk` CLI:
  19.     avrdude -p atmega32u4 -c avr109 -U flash:w:converter_xmk_default.hex:i -P /dev/ttyACM0
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 4 ways:
  27. * **Boot shell command**: Give the `boot` command to the `converter/xmk` shell, e.g. `echo "boot" > /dev/ttyACM0`
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
  29. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  30. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard