logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (2189B)

    

  1. /* Copyright 2024 Cipulot
  2.  *
  3.  * This program is free software: you can redistribute it and/or modify
  4.  * it under the terms of the GNU General Public License as published by
  5.  * the Free Software Foundation, either version 3 of the License, or
  6.  * (at your option) any later version.
  7.  *
  8.  * This program is distributed in the hope that it will be useful,
  9.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11.  * GNU General Public License for more details.
  12.  *
  13.  * You should have received a copy of the GNU General Public License
  14.  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15.  */
  17. #pragma once
  19. #define MATRIX_ROWS 5
  20. #define MATRIX_COLS 15
  22. #define UNUSED_POSITIONS_LIST { {2, 14}, {4, 3}, {4, 5}, {4, 7}, {4, 9}, {4, 14} }
  24. #define MATRIX_ROW_PINS \
  25.     { A8, A15, B12, B8, B9}
  27. #define AMUX_COUNT 1
  28. #define AMUX_MAX_COLS_COUNT 16
  30. #define AMUX_EN_PINS \
  31.     { B5 }
  33. #define AMUX_SEL_PINS \
  34.     { B6, B7, B4, B3 }
  36. #define AMUX_COL_CHANNELS_SIZES \
  37.     { 15 }
  39. #define AMUX_0_COL_CHANNELS \
  40.     { 7, 6, 5, 4, 3, 2, 1, 0, 8, 14, 13, 10, 9, 12, 11}
  42. #define AMUX_COL_CHANNELS AMUX_0_COL_CHANNELS
  44. #define DISCHARGE_PIN A2
  45. #define ANALOG_PORT A3
  47. #define DEFAULT_ACTUATION_MODE 0
  48. #define DEFAULT_MODE_0_ACTUATION_LEVEL 550
  49. #define DEFAULT_MODE_0_RELEASE_LEVEL 500
  50. #define DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET DEFAULT_MODE_0_ACTUATION_LEVEL
  51. #define DEFAULT_MODE_1_ACTUATION_OFFSET 70
  52. #define DEFAULT_MODE_1_RELEASE_OFFSET 70
  53. #define DEFAULT_EXTREMUM 1023
  54. #define EXPECTED_NOISE_FLOOR 0
  55. #define NOISE_FLOOR_THRESHOLD 50
  56. #define BOTTOMING_CALIBRATION_THRESHOLD 50
  57. #define DEFAULT_NOISE_FLOOR_SAMPLING_COUNT 30
  58. #define DEFAULT_BOTTOMING_READING 1023
  59. #define DEFAULT_CALIBRATION_STARTER true
  61. #define DISCHARGE_TIME 10
  63. // #define DEBUG_MATRIX_SCAN_RATE
  64. #define EECONFIG_KB_DATA_SIZE 159
  66. // PWM driver with direct memory access (DMA) support
  67. #define WS2812_PWM_COMPLEMENTARY_OUTPUT
  68. #define WS2812_PWM_DRIVER PWMD1
  69. #define WS2812_PWM_CHANNEL 3
  70. #define WS2812_PWM_PAL_MODE 1
  71. #define WS2812_DMA_STREAM STM32_DMA2_STREAM5
  72. #define WS2812_DMA_CHANNEL 6
  73. #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM1_UP