logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1091B)

    

  1. # Churrosoft Deck-8 (No LEDs version)
  3. ![ChurroDeck-8](https://i.imgur.com/NNmq8hzh.png)
  5. A small 8-key macropad
  7. * Keyboard Maintainer: [Polsaker](https://github.com/Polsaker)
  8. * Hardware Supported: ChurroDeck PCV rev. 1b, 1c and 1d
  9. * Hardware Availability: [churrosoft.ar](https://churrosoft.ar/deck)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make churrosoft/deck8/noleds:default
  15. Flashing example for this keyboard:
  17.     make churrosoft/deck8/noleds:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
  26. * **Physical reset button**: Short the `JP1` jumper in the back side of the PCB.
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available