logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1143B)

    

  1. # Chouchou
  3. ![Chouchou](https://i.imgur.com/BYk2n5Ch.jpeg)
  5. Chouchou (Japanese for butterfly) is a minimalist unibody keyboard designed to be used with the [Taipo](https://inkeys.wiki/en/keymaps/taipo) layout.
  7. - [Github repo](https://github.com/dlip/chouchou)
  8. - Keyboard Maintainer: [Dane Lipscombe](https://github.com/dlip)
  10. Make example for this keyboard (after setting up your build environment):
  12.     make chouchou:default
  14. Flashing example for this keyboard:
  16.     make chouchou:default:flash
  18. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  20. ## Bootloader
  22. Enter the bootloader in 3 ways:
  24. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  25. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  26. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available