logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1298B)

    

  1. # ppr.merro60
  3. ![ppr.merro60 PCB](https://i.imgur.com/xyQA68Xh.jpg)
  5. - Standard 60% format keyboard PCB with USB-C and unified daughterboard compatibility.
  6. - Modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.
  7. - Additional center flex cut.
  8. - Meant to be manufactured in 1.2mm thickness.
  10. * Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b)
  11. * Hardware Supported: chlx PCB ppr.merro60.x.x.x
  13. Make example for this keyboard (after setting up your build environment):
  15.     make chlx/ppr_merro60:default
  17. Flashing example for this keyboard:
  19.     make chlx/ppr_merro60:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter bootloader mode by any of the following options -
  26. - When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
  27. - When plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region
  28. - When plugged in, shorting out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)