logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1263B)

    

  1. # lfn.merro60
  3. ![lfn.merro60 PCB](https://i.imgur.com/naIgvKy.jpg)
  5. - Standard 60% format keyboard PCB with USB-C and unified daughterboard compatibility.
  6. - Modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.
  7. - Meant to be manufactured in 2mm thickness.
  9. * Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b)
  10. * Hardware Supported: chlx PCB lfn.merro60.x.x.x
  12. Make example for this keyboard (after setting up your build environment):
  14.     make chlx/lfn_merro60:default
  16. Flashing example for this keyboard:
  18.     make chlx/lfn_merro60:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter bootloader mode by any of the following options -
  25. - When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
  26. - After plugging in, press and release the reset button on the pcb top-side near the spacebar switch locations
  27. - After plugging in, short out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)