logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1166B)

    

  1. # Ghoul TKL
  3. ![image](https://i.imgur.com/Y39mNA4.jpeg)
  5. A modern replacement PCB for Filco TKLs, adding support for PCB-mount stabilizers and popular alternate layouts. In-switch backlight LEDs are also supported.
  7. * Keyboard Maintainer: [chillKB](https://github.com/chillKB)
  8. * Hardware Supported: Ghoul TKL PCB
  9. * Hardware Availability: [Open source on GitHub](https://github.com/chillKB/ghoulTKL)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make chill/ghoul:default
  15. Flashing example for this keyboard:
  17.     make chill/ghoul:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the top left key (usually Escape) and plug in the keyboard
  26. * **Physical reset button**: Hold the boot button and tap the reset button on the back of the PCB
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available