logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (1410B)

    

  1. // Copyright 2023 Andrew Kannan (@awkannan)
  2. // SPDX-License-Identifier: GPL-2.0-or-later
  4. #pragma once
  6. /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
  7. #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
  9. /* LSE clock */
  10. #define STM32_LSECLK 32768
  12. #define BACKLIGHT_PWM_DRIVER    PWMD3
  13. #define BACKLIGHT_PWM_CHANNEL   1
  14. #define BACKLIGHT_PAL_MODE      1
  16. // I2C config
  17. #define I2C_DRIVER I2CD1
  18. #define I2C1_SCL_PIN B6
  19. #define I2C1_SDA_PIN B7
  20. #define I2C1_SCL_PAL_MODE 1
  21. #define I2C1_SDA_PAL_MODE 1
  22. #define I2C1_TIMINGR_PRESC 0x00U
  23. #define I2C1_TIMINGR_SCLDEL 0x03U
  24. #define I2C1_TIMINGR_SDADEL 0x01U
  25. #define I2C1_TIMINGR_SCLH 0x03U
  26. #define I2C1_TIMINGR_SCLL 0x09U
  28. // configure oled driver for the 128x32 oled
  29. #define OLED_UPDATE_INTERVAL 66 // ~15fps
  31. // OLED_TIMEOUT is incompatible with the OLED_OFF mode
  32. #define OLED_TIMEOUT 0
  34. // OLED timeout reimplemented in the keyboard-specific code
  35. #define CUSTOM_OLED_TIMEOUT 60000
  37. // Custom config starts after VIA's EEPROM usage,
  38. // dynamic keymaps start after this.
  39. // Custom config Usage:
  40. // 1 for enabled encoder modes (1 byte)
  41. // 1 for OLED default mode (1 byte)
  42. // 6 for 3x custom encoder settings, left, right, and press (18 bytes)
  43. #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 20
  45. // And if VIA isn't enabled, fall back to using standard QMK for configuration
  46. #ifndef VIA_ENABLE
  47. #define EECONFIG_KB_DATA_SIZE VIA_EEPROM_CUSTOM_CONFIG_SIZE
  48. #endif