logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1254B)

    

  1. # Reverie PCBs
  3. Reverie PCBs from CannonKeys
  5. This folder is for both the solderable and hotswap versions of this PCB. 
  7. The hotswap version does not support per-key LEDs and has reduced layout support (no ISO)
  9. * Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
  10. * Hardware Supported: RP2040
  11. * Hardware Availability: [CannonKeys](https://cannonkeys.com)
  14. Make example for this keyboard (after setting up your build environment):
  16.     make cannonkeys/reverie/solderable:default
  17.     
  18. Flashing example for this keyboard:
  20.     make cannonkeys/reverie/solderable:default:flash
  22. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  24. ## Bootloader
  26. Enter the bootloader in 3 ways:
  28. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  29. * **Physical reset button**: Hold the "BOOTMODE" button on the back of the PCB and briefly press the "RESET" button on the back of the PCB
  30. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available