logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1076B)

    

  1. # Alchemist Keyboards is0GR
  3. is0GR Keyboard
  5. Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)  
  6. Hardware Supported: STM32F072CBT6 or equivalent  
  8. Make example for this keyboard (after setting up your build environment):
  10.     make cannonkeys/is0gr:default
  12. Flashing example for this keyboard:
  14.     make cannonkeys/is0gr:default:flash
  16. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  18. ## Bootloader
  20. Enter the bootloader in 3 ways:
  22. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (on this board - it's the only key) and plug in the keyboard
  23. * **Physical reset button**: Bridge the two pads labeled "RESET" on the top of the PCB using some tweezers, and hold the tweezers there until the board enters the bootloader mode
  24. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (it isn't by default)