logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1151B)

    

  1. # CannonKeys DB60
  3. DB60 "Daughterboard 60" Keyboard
  5. * Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
  6. * Hardware Supported: STM32F072CBT6 (or equivalent)
  8. Make example for this keyboard (after setting up your build environment):
  10.     make cannonkeys/db60/rev2:default
  12. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  14. Some notes about the versions:
  15. The original DB60 was shipped with the J-02. To build that, you will need to use the following command:
  17.     make cannonkeys/db60/j02:default
  19. Solderable DB60s were shipped with keyboards after the J-02. This variant has cutouts along the top and bottom to support O-ring gasket mounting. To build these, you can use this command:
  21.     make cannonkeys/db60/rev2:default
  22.     
  23. Hotswap ANSI DB60s were shipped with the Bakeneko keyboards from CannonKeys. These also have the o-ring gasket mounting points. To build this:
  25.     make cannonkeys/db60/hotswap:default