logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1283B)

    

  1. # Cerberus Keyboard by CannonKeys
  3. This folder contains firmware for both the Solderable and Hotswap version of Cerberus
  5. The hotswap PCB does not support per-key LEDs and has reduced layout support (no ISO)
  7. * Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
  8. * Hardware Supported: STM32F072CBT6
  10. Make example for this keyboard (after setting up your build environment):
  12.     make cannonkeys/cerberus/hotswap:default
  13.     make cannonkeys/cerberus/solderable:default
  14.     
  15. Flashing example for this keyboard:
  17.     make cannonkeys/cerberus/hotswap:default:flash
  18.     make cannonkeys/cerberus/solderable:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  27. * **Physical reset button**: Toggle the switch on the back of the pcb to "1" and briefly press the button on the back of the PCB
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available