logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1214B)

    

  1. # Swoop
  3. ![Swoop](https://i.imgur.com/mMlmEsdh.jpg)
  5. *The Swoop is an open source split keyboard based on the Ferris/Sweep.*
  7. * Keyboard Maintainer: [Jimmerricks](https://github.com/jimmerricks)
  8. * Hardware Supported: *Swoop MX, Swoop LP + Pro-micro or equivalent*
  9. * Hardware Availability: [*Swoop Repository*](https://github.com/jimmerricks/swoop)
  11. Make example for this keyboard (after setting up your build environment):
  13.     make bluebell/swoop:default
  15. Flashing example for this keyboard:
  17.     make bluebell/swoop:default:avrdude-split-right
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Entering the bootloader:
  25. <!-- * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -->
  26. * **Physical reset button**: Briefly press the small button on the inner side of the PCB - you may have pads you must short instead
  27. <!-- * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -->