logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1212B)

    

  1. # BINEPAD BN009
  3. ![BINEPAD BN009](https://imgur.com/fu0iXD0h.jpg)
  5. A 9% macropad.
  7. * Keyboard Maintainer: [binepad](https://github.com/binepad)
  8. * Hardware Supported:
  9.     * BN009 R1 *(ft. ATmega32U4)*
  10.     * BN009 R2 *(ft. STM32F103)*
  11. * Hardware Availability: [binepad.com](https://www.binepad.com/bn009)
  13. Make example for this keyboard (after setting up your build environment):
  15.     make binepad/bn009/r1:default
  17. ..or..
  19.     make binepad/bn009/r2:default
  21. Flashing example for this keyboard:
  23.     make binepad/bn009/r1:default:flash
  25. ..or..
  27.     make binepad/bn009/r2:default:flash
  29. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
  30. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  32. ## Bootloader
  34. Enter the bootloader in 3 ways:
  36. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key) and plug in the keyboard
  37. * **Physical reset button**: Briefly press the button under the small hole on the back of the macropad
  38. * **Keycode in layout**: Press the key mapped to `QK_BOOT` or `RESET` if it is available