logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (1319B)

    

  1. /*
  2.  * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
  3.  *
  4.  * This program is free software: you can redistribute it and/or modify
  5.  * it under the terms of the GNU General Public License as published by
  6.  * the Free Software Foundation, either version 2 of the License, or
  7.  * (at your option) any later version.
  8.  *
  9.  * This program is distributed in the hope that it will be useful,
  10.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12.  * GNU General Public License for more details.
  13.  *
  14.  * You should have received a copy of the GNU General Public License
  15.  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16.  */
  18. #pragma once
  20. /* Handedness. */
  21. #define MASTER_RIGHT
  23. // To use the handedness pin, resistors need to be installed on the adapter PCB.
  24. // If so, uncomment the following code, and undefine MASTER_RIGHT above.
  25. // #define A0 PAL_LINE(GPIOA, 0)
  26. // #define SPLIT_HAND_PIN A0
  27. // #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
  29. /* RGB settings. */
  30. #define WS2812_PWM_DRIVER PWMD2
  31. #define WS2812_PWM_CHANNEL 4
  32. #define WS2812_PWM_PAL_MODE 1
  33. #define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM7
  34. #define WS2812_PWM_DMA_CHANNEL 3
  36. /* CRC. */
  37. #define CRC8_USE_TABLE
  38. #define CRC8_OPTIMIZE_SPEED