logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

config.h (1567B)

    

  1. /*
  2.  * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
  3.  *
  4.  * This program is free software: you can redistribute it and/or modify
  5.  * it under the terms of the GNU General Publicw License as published by
  6.  * the Free Software Foundation, either version 2 of the License, or
  7.  * (at your option) any later version.
  8.  *
  9.  * This program is distributed in the hope that it will be useful,
  10.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12.  * GNU General Public License for more details.
  13.  *
  14.  * You should have received a copy of the GNU General Public License
  15.  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16.  */
  18. #pragma once
  20. /* Handedness. */
  21. #define SPLIT_HAND_PIN A3 // High -> left, Low -> right.
  23. /* RGB settings. */
  24. #define WS2812_PWM_DRIVER PWMD2
  25. #define WS2812_PWM_CHANNEL 2
  26. #define WS2812_PWM_PAL_MODE 1
  27. #define WS2812_EXTERNAL_PULLUP
  28. #define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM1
  29. #define WS2812_PWM_DMA_CHANNEL 3
  31. /* Serial configuration for split keyboard. */
  32. #define SERIAL_USART_TX_PIN A9
  34. /* CRC. */
  35. #define CRC8_USE_TABLE
  36. #define CRC8_OPTIMIZE_SPEED
  38. /* SPI config for EEPROM and pmw3360 sensor. */
  39. #define SPI_DRIVER SPID1
  40. #define SPI_SCK_PIN A5
  41. #define SPI_SCK_PAL_MODE 5
  42. #define SPI_MOSI_PIN A7
  43. #define SPI_MOSI_PAL_MODE 5
  44. #define SPI_MISO_PIN A6
  45. #define SPI_MISO_PAL_MODE 5
  47. /* EEPROM config. */
  48. #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
  50. /* PMW3360 settings. */
  51. #define POINTING_DEVICE_CS_PIN B14
  52. #define PMW33XX_CS_DIVISOR 64