logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1342B)

    

  1. # Ishi 80 Mk 0
  3. ![argo_works/ishi/80/mk0_avr](https://i.imgur.com/TVn6zeqh.jpeg)
  5. Ishi 80 is a 60% keyboard with a SouthPaw, Mirrored Numpad. 
  7. Note: This firmware is for ATMega32U4 based daughterboards with the standard Pro-Micro footprint. It does not support the Encoder and OLED display functionality.
  9. * Keyboard Maintainer: [Jason Devadoss](https://github.com/jasonj2232)
  10. * Hardware Supported: Ishi80 Mk 0 with standard Pro Micro footprint daughterboards
  11. * Hardware Availability: -
  13. Make example for this keyboard (after setting up your build environment):
  15.     make argo_works/ishi/80/mk0_avr:default
  17. Flashing example for this keyboard:
  19.     make argo_works/ishi/80/mk0_avr:default:flash
  21. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  23. ## Bootloader
  25. Enter the bootloader in 3 ways:
  27. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  28. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  29. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available