logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1224B)

    

  1. # AlhenKB - Macropad 5x4 and Numpad
  3. ![Imgur Image](https://imgur.com/t7Zi2w3h.jpg) 
  4. ![Imgur Image](https://i.imgur.com/5xlKJlBh.jpg)
  7. A macropad 5x4 for MerryPCB.
  9. * Keyboard Maintainer: [Alhen](https://github.com/alhenx)
  10. * Hardware Supported: MerryPCB
  12. Make example for this keyboard (after setting up your build environment):
  14. Macropad:
  16.     make alhenkb/macropad5x4:default
  17.     
  18. Numpad:
  20.     make alhenkb/macropad5x4:numpad
  22. Flashing example for this keyboard:
  24. Macropad:
  26.     make alhenkb/macropad5x4:default:flash
  27.     
  29. Numpad:
  31.     make alhenkb/macropad5x4:numpad:flash
  33. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  35. ## Bootloader
  37. Enter the bootloader in 3 ways:
  39. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  40. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
  41. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available