logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1212B)

    

  1. # Duet Switch Tester
  3. ![Cover image](https://i.imgur.com/sFuHJbLh.png)
  5. A switch tester intended for event/storefront use
  7. * Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
  8. * Hardware Supported: The [Duet PCB](https://github.com/ai03-2725/duet-switch-tester/tree/main/Duet-MainPCB), powered by the RP2040
  9. * Hardware Availability: [Open-source](https://github.com/ai03-2725/duet-switch-tester)
  12. Make example for this keyboard (after setting up your build environment):
  14.     make ai03/duet:default
  16. Flashing example for this keyboard:
  18.     make ai03/duet:default:flash
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. ## Bootloader
  24. Enter the bootloader in 3 ways:
  26. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  27. * **Physical reset button**: Press the reset button on the back of the PCB while holding the Bootmode switch
  28. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available