logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1333B)

    

  1. # Kintsugi
  3. ![kintsugi](https://i.imgur.com/HPdmzdCl.jpeg)
  5. A 65%-ish keyboard with some extra features.
  7. ## Features
  9. * Powered by an ATmega32u4 microcontroller (current version needs an Elite-C to work).
  10. * Encoder.
  11. * OLED screen.
  12. * Underglow.
  13. * Hotswap sockets.
  15. ## General info
  17. * Keyboard Maintainer: [Arturo Avila](https://github.com/ADPenrose)
  18. * Hardware Supported: Kintsugi v1 PCB
  19. * Hardware Availability: [Arturo Avila](https://github.com/ADPenrose)
  21. Make example for this keyboard (after setting up your build environment):
  23.     make kintsugi:default
  25. Flashing example for this keyboard:
  27.     make kintsugi:default:flash
  29. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  31. ## Bootloader
  33. Enter the bootloader in 3 ways:
  35. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  36. * **Physical reset button**: Briefly press the button on the front of the Elite-C microcontroller _**before soldering**_ it to the PCB- some may have pads you must short instead
  37. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available