logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1216B)

    

  1. # AkemiPad
  3. ![adpenrose/akemipad](https://i.imgur.com/2q4kJOAl.png)
  5. A numpad powered by a ProMicro (currently ATmega based), with multiple layout options and support for an encoder, a piezo buzzer, an OLED, and per-key RGB lighting.
  7. * Keyboard Maintainer: [Arturo Avila](https://github.com/ADPenrose)
  8. * Hardware Supported: AkemiPad v1 PCB
  9. * Hardware Availability: [Arturo Avila](https://github.com/ADPenrose) 
  11. Make example for this keyboard (after setting up your build environment):
  13.     make adpenrose/akemipad:default
  15. Flashing example for this keyboard:
  17.     make adpenrose/akemipad:default:flash
  19. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  21. ## Bootloader
  23. Enter the bootloader in 3 ways:
  25. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  26. * **Physical reset button**: Quickly press two times the button on the back of the PCB
  27. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available