logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (2302B)

    

  1. # Acheron Elongate rev. Beta QMK firmware repository
  3. ![](https://i.imgur.com/G9LESkUh.jpg)
  5. * Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
  6. * Hardware Supported: [open-source PCB](https://github.com/AcheronProject/Elongate) powered by STM32F072 microcontroller
  7. * Hardware Availability: the revision beta of Elongate was never publicly sold.
  9. ## Introduction
  11. This is the QMK firmware repository for the Elongate PCB revision Beta and pre-revision Beta versions, which was the initial revision PCB for this keyboard; hence it was never sold publicly.
  13. The Elongate PCB is an Open-Hardware-guideline-compliant PCB which files can be found at [this repository](https://github.com/AcheronProject/Elongate). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
  15. ## How to flash
  17. ### Enter bootloader
  19. The DFU state in the bootloader can be accessed in 3 ways:
  21. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  22. * **Physical reset button**: press the button on the front of the PCB.
  23. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
  25. ## Compile firmware
  27. You can build the default layout firwmare for Elongate after setting up your build environment by using:
  29.     make acheron/elongate/beta:default
  31. After entering DFU state in your PCB, you can download the binary file generated through `dfu-util` or a GUI like QMK Toolbox.
  33. To directly flash the PCB after it is put into a DFU state, use
  35.     make acheron/elongate/beta:default:flash
  37. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  39. ## PCB Documentation
  41. See the [AcheronDocs](https://acheronproject.com/pcbs/elongate/) page for the ElongatePCB full documentation. You can also check the KiCad PCB files at the [Elongate GitHub repository](https://github.com/AcheronProject/Elongate).
  43. Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.4](https://acheronproject.com/AOHL14/) under which the Elongate PCB is published.