readme.md (1917B)
- # Acheron Apollo87H QMK firmware
- 
- The Apollo87H is Acheron Project's open-source, freely available tenkeyless (TKL) keyboard Printed Circuit Boards (PCB) which features:
- - Per-key RGB lighting
- - Hotswap sockets
- - ANSI default layout with F12 and 6.25 units spacebar.
- * Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
- * Hardware Supported: open-source PCB using the [Joker template](https://acheronproject.com/joker_mcus/joker/). First units were manufactured using STM32F401 microcontroller;
- * Hardware Availability: these PCBs are open-source so you can manufacture them yourself or order them from a factory. See the [project's documentation](https://acheronproject.com/pcbs/apollo/apollo/) for more information.
- In order to flash this PCB, first build the default layout (after setting up your build environment):
- make acheron/apollo/87h/<revision>:default
- Where `revision` is the revision of your PCB. Two revisions were prototyped and sold: _Gamma_ and _Delta_. Look into the label on the PCB's back to see what revision is yours. Ready-to-use binaries for the default and the VIA layouts are available in the release pages of the [project's repository](https://github.com/AcheronProject/Apollo87H).
- After building or downloading the firmware, put the PCB into DFU mode by holding the reset button for at least five seconds and upload the firmware onto the microcontroller through a utility like `dfu-util` or QMK Toolbox. Alternatively, you can build and flash using:
- make acheron/apollo/87h/<revision>:default:flash
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).