logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1408B)

    

  1. # waffling60
  3. A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.
  5. More info: https://geekhack.org/index.php?topic=103531.0
  7. * Keyboard Maintainer: [4pplet](https://github.com/4pplet)
  8. * Hardware Supported: [waffling60](https://github.com/4pplet/waffling60)
  10. Make example for this keyboard (after setting up your build environment):
  12.     make 4pplet/waffling60/rev_a:default
  13.     make 4pplet/waffling60/rev_b:default
  14.     make 4pplet/waffling60/rev_c:default
  15.     make 4pplet/waffling60/rev_d:default
  16.     make 4pplet/waffling60/rev_e:default
  17.     make 4pplet/waffling60/rev_d_ansi:default
  18.     make 4pplet/waffling60/rev_d_iso:default
  20. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  22. How to enter bootloader (DFU):
  23. * Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.
  25. Alternative option if the firmware is already pre-flashed:
  26. * Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.