logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1109B)

    

  1. # Unextended Standard PCB
  3. PCB for the Unextended Standard Project. The PCB enables use of M0116, M0118, IIc and NeXT keycaps and is designed to fit in the open sourced Unextended case.
  5. * Keyboard Maintainer: [4pplet](https://github.com/4pplet)
  6. * Hardware Supported: [Unextended Standard PCB](https://github.com/4pplet/Unextended-Standard-PCB)
  8. Make example for this keyboard (after setting up your build environment):
  10.     make 4pplet/unextended_std/rev_a:default
  12. Flashing example for this keyboard:
  14.     make 4pplet/unextended_std/rev_a:default:flash
  16. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  18. ## Bootloader
  19. Enter the bootloader in 3 ways:
  21. * **Bootmagic reset**: Hold down the Escape-key and plug in the keyboard
  22. * **Physical reset header**: Briefly short the header labled "BL/reset" on the PCB
  23. * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available