logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1096B)

    

  1. # pi60_rgb
  3. The pi60 RGB is a 60% pcb from 1upkeyboards. This keyboard features an ANSI layout hot swap PCB with per-key in-switch RGB lighting. The controller is a Raspberry Pi rp2040 microcontroller.
  5. * Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
  6. * Hardware Availability: (https://1upkeyboards.com/shop/controllers/1upkeyboards-pi60rgb-60-pcb/)
  8. Make example for this keyboard (after setting up your build environment):
  10.     make 1upkeyboards/pi60_rgb:default
  12. Flashing example for this keyboard:
  14.     make 1upkeyboards/pi60_rgb:default:flash
  16. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  18. ## Bootloader
  20. Enter the bootloader in 2 ways:
  22. * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  23. * **Bootloader button**: Hold the button on the back of the PCB and plug in the keyboard