logo

qmk_firmware

custom branch of QMK firmware git clone https://anongit.hacktivis.me/git/qmk_firmware.git

readme.md (1665B)

    

  1. # 1k
  3. ![1k](https://booth.pximg.net/aaeb2dda-e169-44c0-ba5a-5b42cc5c2627/i/3504781/c1708a8a-061b-4a6c-907d-72d0eab47d4a.png)
  5. 1% Custom mechanical keyboard. ATtiny85 powered, with 1*WS2812 LED, and the micronucleus bootloader.
  7. **Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
  9. * Keyboard Maintainer: [MakotoKurauchi](https://github.com/MakotoKurauchi)
  10. * Hardware Supported: 1k
  11. * Hardware Availability: [booth](https://ninep.booth.pm/items/3504781)
  13. Make example for this keyboard (after setting up your build environment):
  15.     make 1k:default
  17. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
  19. ## Flashing
  20. ### Prerequisites
  22. ```bash
  23. git clone https://github.com/micronucleus/micronucleus.git
  24. cd micronucleus/commandline/
  25. sudo make install
  26. ```
  28. On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
  30. ```bash
  31. sudo udevadm control --reload-rules
  32. sudo udevadm trigger
  33. ```
  35. ### Instructions
  37. ```bash
  38. make 1k:default:flash
  40. # or directly with...
  41. micronucleus --run <firmware.hex>
  42. ```
  44. ### Recovery
  46. * [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test)
  47. * [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)